We are Starbright
Forever
Physical description:
Density: 320--380kg/m3
Screw holding: 155 to 190lbs:
MOE:
MOR:
PSI: MC: 8 – 12%
Physical description:
Density: 480—520kg/m3
Screw holding: 180 to 220lbs:
MOE: 1,100—1,250KPSI;
MOR: 11,000PSI—12,000psi;
Physical description:
Density: 600—650kg/m3
Screw holding: 220-280lbs;
MOE: 1,200-1,350kpsi;
MOR: 11,500 to 14,500psi;
MC: 8 – 12%
Physical description:
Density: 580—620kg/m3
Screw holding: 180 to 220LBS:
MOE: 1200-1450kpsi
MOR: 11000-12000psi;
MC: 8 – 12%Screw holding: 180 to 220LBS:
Physical description:
Density: 18.7 lb/ft3- 25 lb/ft3:
Screw holding: 175 to 220LBS:
MOE: 0.87 – 1.01MPSI (side) & 0.72 – 0.87MPSI (face)
MOR: 11600 to 14503
PSI: MC: 8 – 12%
The density of laminated albasia veneer lumber is good and very easy for machinery and handling, assembly with low air pressure, recommended for interior decoration and building items such as base moulding profiles, shiplap, boards, and so on.
Physical description:
Density: 350-400kg/m3,
Screw holding: 175 to 220lbs:
Average MOE: 800—900kpsi(side) & 500—700kpsi (face)
Average MOR: >4000psi
MC: 8 – 12%
Made from economical rubber wood plantation in Indonesia. It complies with CARB2 and TSCA standard and works well for wood machinery. Highly recommended for exterior building items such as brickmould, entry door frames, window frames
Physical description:
Density: 700--780kg/m3,
Screw holding: 220 to 280lbs:
Average MOE: 1200—1350kpsi(side) & 1100—1200kpsi (face)
Average MOR: 8000psi—9500psi
MC: 8 – 12%
MDF is versatile and cost-effective composite wood panel complies with CARB2 standard, Approved for interior, non-structural building items. We use this material for base moulding profiles, S4S and shiplap.
Physical description:
Density: 550-580kg/m3
Screw holding: 175 to 220LBS:
Average MOE: 250--420 PSI;
Average MOR: 2500-2900PSI
As is wellknown, New Engineered Albasia Laminated board from Indonesia has been approved for interior structural housing items. We widely use this material for interior door components such as K jambs and flats jambs.
Physical description:
Density: 500kg/m3
Screw Holding: 175 to 220LBS:
MOE:
MOR:
MC: 8 – 12%
Utilizing our best-in-class knowledge in wood product engineering, we are committed to our customer success.